Rick Donato

The other day I was asked, What interface should we use for the vPC peer-keepalive link? In fact this is a good question, considering the fact you wouldnt want to burn a SFP port just for the peer keepalive. After a short amount of digging, the answer was found within

Introduction We now come to the final part of the Cisco IOS FHRP series - GLBP (Gateway Load Balancing Protocol). Again, we will look at its features and then the configuration steps required to configure it on the Cisco IOS platform. What is GLBP? GLBP is a Cisco proprietary protocol,

Introduction In the previous part of this 3 part series, we looked at HSRP. Today we will look at VRRP, its features and how to configure it within Cisco IOS. VRRP vs HSRP VRRP is extremely similar to HSRP. However, unlike HSRP, VRRP is not Cisco proprietary. Let us look

Introduction Within this 3 part series we will be looking at 3 types of FHRP (First Hop Redundancy Protocol) on Cisco IOS - HSRP, VRRP and GLBP. We will look into the features that they each provide and also how to configure them. We will begin by exploring HSRP. So

Introduction Within this article, we will look at equal cost and unequal cost traffic distribution in EIGRP. Note: This article is written based upon Cisco IOS 15.x. ECMP - Equal Cost Out of the box, EIGRP provides ECMP, which can also be configured via the maximum-path command. Via the

Introduction Within this article we will look at a Cisco feature called EIGRP named mode. As this involves IPv6 we will also provide an overview of IPv6 in EIGRP, whilst also providing a configuration example. The Problem Though EIGRP supports both IPv4 and IPv6, the configuration methods for both differ.

Introduction In order for OSPF-enabled routers to exchange information, they must form an adjacency (relationship) with their neighbor. Within this article, we will look at the process and various steps involved. Relationship Requirements Before the OSPF router even starts to try and form an adjacency, OSPF must know/determine the

What is VCS? Virtualized Cloud Services (VCS) is a datacenter based SDN platform provided by Nuage Networks. VCS provides an overlay solution to interconnect bare metal assets and virtual machines together within your network, via an overlay. The VSC platform is built upon the following components: * VSD (Management Plane) * VSC

What is Nuage Networks? Nuage Networks is a Nokia based company that products SDN and SD-WAN products. As per the Nuage Network website, "We glue together cloud networks that run on any platform, networking hardware, cloud management system, and cloud provider".[1] What is Nuage VSP? In a